So I make one more full un-provisioning but problems does not go away.
I can fully configure AMT5.0 PC via PSK and then connect to it via ManageabilityDirector/Commander with fully direct configuring via TLS 16993.
I can change all settings and all works fine. But when I trying to open "TakeControlTerminal" - error appears!
At terminal I can add 2 boot disks (floppy .img and CD .iso), I can reboot AMT PC with booting from CD - this shows at AMT PC boot screen as:
"AMT Boot Option: [IDER Primary Slave Device Boot] [SOL]"
Also at BIOS now I see two new storage devices named as "IDER....".
But at boot AMT PC just dont see those IDER boot disks! So it writes standard error: "Reboot and Select proper Boot Device".
Also at Terminal i see errors when I: start terminal; pressing "connect SOL"; pressing "IDER Activate".
Through MEBx I check that all needed options is really turned ON - and its true, SOL&IDER=Enable.
Also I try to change COM port address (IRQ) at BIOS, but it does not change anything.
I already try all what I can about 10-20times and this idiotic error just make me mad...
Also I still can not connect to my AMT5.0 PC via newer MechCommander.
Does Intel have at least one professional at AMT division that can help me???