Re: SCCM - Failed to establish TCP session
Kishorek, Activator is no longer available, please use either ACUConfig, or ACUWizard to configure your vPro computers. Both can be found in the SCS 9 download located here.SCS 9 Download
View ArticleRe: NUC i5 vPro problems
Hi there, thanks for your help. I did manage to solve my problem. When the NUC boots, it set the keyboard's NumLock toggle to "on". This is not immediately apparent, as there is no LED or any...
View ArticleRe: SCCM - Failed to establish TCP session
Could you please suggest what is the equivalent way to reopening the provisioning ports on the system like the suggestion above with "activator.exe /s http://localhost/ /c /h" when using ACUConfig or...
View ArticleSCS Add-on for MS SCCM 2012 - user account settings
Hello, I am attempting to install the SCS add-on for SCCM 2012 and see a configuration setting in the setup that I do not understand. My question is related to the dialog box that asks for "User...
View ArticleFailed to get list of profiles. File decryption failed (0xc000028l)
After upgrading to V9.0 I am able to pull system details in the console however all profile data fails to load. I am also unable to create new profiles as the same error is presented. Was able to find...
View ArticleRe: vnc viewer plus unable to connect to vpro computer from the internet
In order to connect from the wide area network (WAN), you have to turn on cloud desktop settings in the bios.There you can set an access point IP and set it to DHCP or STATIC client IP settings. You...
View ArticleRe: Failed to get list of profiles. File decryption failed (0xc000028l)
Hi jwest, It looks like from these errors that the database was updated, but the RCS server itself was not. The RCS must be upgraded, or if you've already uninstalled version 8, then RCS version 9 must...
View ArticleRe: IntelSCS Upgrade Issues v8.2.0.19 -> 9.0.23.10 / 0xc000028f
Hi UU0113, So just to be clear, when upgrading your RCS server from version 8 to version 9, did you upgrade the existing RCS server or install version 9 onto a new server? -Alan
View ArticleFailure Using acuconfig.exe and maintainamt/maintainviaRCSonly switch
To give a sense of what I am trying to do: We have over 2000 machines that are all vpro capable and provisioned. At the end of their life cycle (4 years) in our department we phase them out and they...
View ArticleRe: IntelSCS Upgrade Issues v8.2.0.19 -> 9.0.23.10 / 0xc000028f
Hi Alan, I upgraded directly onto the existing server installation. best,Wolfgang
View ArticleRe: SCS Add-on for MS SCCM 2012 - user account settings
While this is optional step, it is recommended to define a user account for this. If you decide to skip this and run packages under the local system account then you two options. 1. Give each of the...
View ArticleRe: IntelSCS Upgrade Issues v8.2.0.19 -> 9.0.23.10 / 0xc000028f
Hi Wolfgang, Can you please provide both the SCSInstaller.log and the SCSInstallerMSI.log? These will help determine what's going wrong. Thanks.-Alan
View ArticleRe: Failure Using acuconfig.exe and maintainamt/maintainviaRCSonly switch
Hi David, MaintainAMT and MaintainviaRCSOnly only allow you to change the built-in Admin account password. There is no way to remotely alter the MEBx password; this has to be done locally. Without...
View ArticleRe: Failure Using acuconfig.exe and maintainamt/maintainviaRCSonly switch
Content moved from a duplicate thread. Alan, thanks for responding. If you note in my post above, although I didn't explain it as such, I did make a new profile named "WIPE_AMT_PROFILE" which is a...
View ArticleRe: Failure Using acuconfig.exe and maintainamt/maintainviaRCSonly switch
Alan, Sorry I missed the top of your response where you said not to use the maintain command rather configure again. I am trying that with the new profile that has a different password only...
View ArticleRe: Failure Using acuconfig.exe and maintainamt/maintainviaRCSonly switch
David, I believe the reason you're having issues with your ACUConfig commands is your WinPE image doesn't contain the MEI drivers. When migrating systems out of your environment it's best practice to...
View ArticleRe: IntelSCS Upgrade Issues v8.2.0.19 -> 9.0.23.10 / 0xc000028f
Hi Alan, please find the logfiles zipped at the following location for download:https://dl.dropboxusercontent.com/u/1327069/SCSInstallerLogs.zip best,Wolfgang
View ArticleRe: SCS Add-on for MS SCCM 2012 - user account settings
thank you Alan, using a user account worked perfect me.
View ArticleRe: IntelSCS Upgrade Issues v8.2.0.19 -> 9.0.23.10 / 0xc000028f
Thank you. I will look these over and see what I can find.
View ArticleIntel vPRO info
Ciao a tutti,se posseggo un server o un pc desktop con processori Intel vPRO, posso monitorare con questo tutti i pc (Mac, Linux, Pentium 4, AMD Athlon) e gli apparati di rete (Switch e firewall)? Che...
View Article