Re: Mesh Commander (Remote Desktop works over LAN only)
Hi Matthew, checking in to see if you needed anything further from us as I have not heard back from you.Regards,Michael
View ArticleRe: Mesh Commander (Remote Desktop works over LAN only)
Hi Michael, Thanks for your reply - I have been away so no had chance to try anything further yet I am afraid. I followed the TLS video (MeshCommander - TLS & Mutual-TLS - YouTube) for mesh...
View ArticleClik here to view.
Re: Either the user name was not recognised
Hello eugin_b, Thank you for the updated information. I will either try the BIOS update or contact the system board manufacturer to verify if the BIOS will also help with Vpro configuration rest...
View ArticleClik here to view.
Static IP address in SCS console while client's IPv4 Ethernet addresses keep...
I'm a system admin and had the task to configure the MEBx PW of our vPro clients.Using SCS on a W2012R2 VM in DB mode (SQL2014 Express), all my clients are configured in 'Admin Control Mode'.For newly...
View ArticleClik here to view.
Re: Static IP address in SCS console while client's IPv4 Ethernet addresses...
Hello Martin Ebell(marebe),Are you using a Dedicated IP?Do you get a specific error code like “91”On an Intel AMT system, the host platform and the Intel AMT device both have an IP address. These IP...
View ArticleRe: Mesh Commander (Remote Desktop works over LAN only)
Hi Jon,Apologies, for some reason, showed as "Matthew". Thank you for getting back to me on this. Unfortunately, I actually have no opportunity to work with a Mac as for now, the demand for this...
View ArticleClik here to view.
Re: Either the user name was not recognised
Hello Henry, Thank you. I unconfigured AMT and configured it again. It's working right now. I see how long It will work.
View ArticleRe: Static IP address in SCS console while client's IPv4 Ethernet addresses...
Thank you for your response. To answer your questions: We use DHCP for our clients. (Only the servers have a fixed IP.) I don't see an error code 91 in the log. We don't use a dedicated network file as...
View ArticleClik here to view.
Re: Static IP address in SCS console while client's IPv4 Ethernet addresses...
Hello Martin Ebell(marebe), Let me check into this situation and as soon as I have an update I will let you know. Please let me know if you have any more questions. Best...
View ArticleRe: Intel AMT and VLAN Configuration
Hello all,We will proceed to mark this thread as resolved. If you have further issues or questions just go ahead and create a new topic.Jose A.
View ArticleRe: What's different between Non Vpro and ME disable configuration?
Hi Jose,Thanks for your feedback !I mean some CPU like i3, i5/I7 tran that are Non Vpro system,Can I say, if we disable ME from VPRO(i5/i7) will be equal to those Non VPRO system?
View ArticleRe: What's different between Non Vpro and ME disable configuration?
Hello hijasonkidd,If you disable the ME from a vPro system will make it equivalent to a non vPro system. I think this is correct. To me, it will always be a vPro system with its features disabled, but...
View ArticleIMSS configuration
I would like to control the user notifications settings in the IMSS (Intel Management and Security Status) utility.How can this be controlled during or after an automated installation process? Martin
View ArticleClik here to view.
Re: IMSS configuration
Hello Martin, Let me check if user notification settings could be controlled via IMSS for additional information please refer to Intel® Management and Security Status Application where you may get more...
View ArticleClik here to view.
Re: Either the user name was not recognised
Hello eugin_b, Thank you for the information. I hope this installation works. I will wait any information you can provide us.If there is anything else we can help please feel free to ask.Best...
View ArticleRe: Static IP address in SCS console while client's IPv4 Ethernet addresses...
I start to understand this a little better. The 'Intel AMT IPv4' value in the 'List of Systems' in the 'SCS' console is irrelevant. The 'Get configured Password' function will come up with the remote...
View ArticleClik here to view.
Re: Static IP address in SCS console while client's IPv4 Ethernet addresses...
Hello marebe , You can use Intel SCS to configure Intel AMT on systems that have Intel AMT 6.2 and higher. Each system that you want to configure using Intel SCS must have these drivers and services...
View ArticleRe: Either the user name was not recognised
Hi Henry! I think you misunderstood. I already had made such fix before. It has been working just for one or two months. After such fix the issue appears again but I need a permanent solution. It is...
View ArticleRe: Either the user name was not recognised
Hello eugin_b, My apologies, it was definitely misunderstood on my side. Please provide me with the main board manufacturer and the server manufacturer, plus the firmware Version been use and any...
View ArticleClik here to view.
Re: Either the user name was not recognised
Below are the additional details you asked for System Information---------------------------OS: Microsoft Windows Server 2012 R2 StandardOS Version: 6.3.9600 Build 9600System Manufacturer: GigaByte...
View Article