RCSUtils.exe /Certificate View /RCSUser NetworkService /Log File ViewCert.log...
I installed an AMT provisioning certificate into the certificate store or the Network Service running: RCSUtils.exe /Certificate Add AMTCERT.PFXP@ssw0rd /RCSUser NetworkService /Log File AddCert.logTo...
View ArticleRe: Thermal Management controller - ID24 unplug
Thank you Mr Henry for your fast answer. According to the information obtained by Drivers Easy Pro software, the version of the device would be 9.2.21032 dated 2013-07-25.One of the screenshots...
View ArticleClik here to view.
Intel SCS on SCCM 1702
Hello,We recently upgraded to SCCM 1702. Since we upgraded to the newer version, Intel AMT hasnt worked. So, what I did was I uninstalled intel SCS SCCM Addon and thought that i can redo and that might...
View ArticleRe: Remote Desktop stopped working with new Win10 install
This is a question you need to take to Microsoft. I can tell you that I had problems when I went to W10 with remote desktop. They were the firewall settings, where the inbound Exception Parameters...
View ArticlevPro Remote Desktop stopped working with new Win10 install
Hi, I am working on a Lenovo M93p 10A9-000SUS SFF desktop with an i5-4570 processor. The Intel Management Engine is version 9.1.42. This machine was running Windows 7 with the Intel Management Engine...
View ArticleClik here to view.
Re: Remote Desktop stopped working with new Win10 install
Al, Thanks for your response. I see I need to clarify. The "Remote Desktop" that I am referring to has nothing to do with Microsoft's Remote Desktop protocol or functionality. It is an Intel AMT vPro...
View ArticleRe: Remote Desktop stopped working with new Win10 install
Ok, I understand now. Sorry for the confusion. Doc
View ArticleRe: RCSUtils.exe /Certificate View /RCSUser NetworkService /Log File...
Hello Frank Jestädt,Thanks for joining the community.As part of the research process we will need you to attach the following information:1. Screen shot of the certificate, specifically the values...
View ArticleRe: Remote Desktop stopped working with new Win10 install
Hello mcbsys, Regarding your question, “Problems to remote desktop using MeshCommander 0.6.3“.We are going to do our best to help with your inquiry, but please remember that MeshCommander has...
View ArticleRe: Intel SCS on SCCM 1702
Hello Aman Kahlon,Thanks for joining the community.According to the Intel(R)_SCS_Addon_SCCM configuration guide Prerequisites section 3.1, found on the Intel® SCS Add-on for Microsoft* System Center...
View ArticleRe: Thermal Management controller - ID24 unplug
Hello shermichel, I am glad to help you. But I am afraid there is not Dropbox Link on your last interaction.I will be more than glad to take a look at the file. But I will recommend to...
View ArticleRe: RCSUtils.exe /Certificate View /RCSUser NetworkService /Log File...
Hello Jose,thanks for reply.Please find the information and the logfile attached.kind regards,Frank
View ArticleClik here to view.
Where can change WEBUI account/password in Enterprise provision(PKI) through...
Hi,If using 16992 provision, the login account/password of WEBUI will be admin/P@ssw0rd.But I'm wondering if I'm using 16993 provision, where can modify WEBUI account/password? ACS in SCS console? or...
View ArticleRe: Intel SCS on SCCM 1702
Hello Jose, I am using SCCM 1702 version. Is IntelSCS_SCCm_Addon_2.1.8.10 is compatible with SCCM 1702? Thank you,Aman
View ArticleRe: Intel AMT & MeshCommander
Could you join a skype call with Ylian and I at 11:00 am Central ? Also , I would prefer not to give my phone number on this site but I could provide you with my personal email address :...
View ArticleClik here to view.
Cannot connect to a device using Intel Manageability Commander
Hello, I am in middle of testing Intel SCS functionality in SCCM 1702 CB. When ever i try to connect to a device using Intel Manageability command , it gives me this error.Following are installed on...
View ArticleClik here to view.
Re: Remote Desktop stopped working with new Win10 install
Henry, Thank you for your message. To my surprise, upgrading MeshCommander from 0.6.3 to 0.6.4 solved the problem. I can access AMT Remote Desktop without any changes to the firewall or anti-virus....
View ArticleRe: Intel SCS on SCCM 1702
Hello Aman Kahlon,Unfortunately it is not. I already double checked with our engineering department and they just confirmed this. Seems to be more from the Microsoft side than the Intel side...
View ArticleRe: Remote Desktop stopped working with new Win10 install
Hello mcbsys, I am glad the update of the MeshCommander (not firmware) helped to resolve the connectivity.For the Management Engine, I will best recommend you to contact Lenovo.This because their...
View ArticleRe: RCSUtils.exe /Certificate View /RCSUser NetworkService /Log File...
Hello Frank Jestädt, After reviewing the logs attached we found that the certificate seems to be stored in the in an account other than RCSUser NetworkService where you are trying to retrieve it. So...
View Article