Re: NTEL-SA-00075 Detection does not detect status in registry
Hello Michael, I have run the inventory task with SCS System Discovery tool. The first results are coming in. So far I received the following FW version in my environment....
View ArticleRe: Intel Capability Licensing Service Client is obsolete
Hello! I'm having the same issue, except I have another motherboard (ASRock B150M-HDS). I already tried download latest chipset drivers (Download Intel® Chipset Device Software (INF Update Utility) )...
View ArticleClik here to view.
Re: NTEL-SA-00075 Detection does not detect status in registry
Hi Tomasz,I will send a personal message via e-mail to set up a support call.Regards,Michael
View ArticleClik here to view.
Re: NTEL-SA-00075 Detection does not detect status in registry
Hello, I am also receiving the same errors when attempting to run the detection tool in my environment. Was a fix found? Tomasz.Wozniak Below is my output log:INTEL-SA-00086 Detection Tool will start...
View ArticleClik here to view.
Re: Missing Boot Options on AMT WebUI
Hello Yes, I can confirm that SA-00075 is installed. The previous firmware was 9.0.13.1402.I installed the Intel Manageability Commander.System Status: Now I changed the "User Content" from "Always...
View ArticleClik here to view.
Re: Missing Boot Options on AMT WebUI
Hi Musketier, I'm assuming you mean "User Consent"... For mass deployment, if you already have a profile created, you can modify that profile by launching the ACUWizard, under System Settings, KVM...
View ArticleRe: Missing Boot Options on AMT WebUI
Hello, sorry, yes "User Consent" is correct.I would like to go back to your answer from 13.12.2017. Where you explain switching from CCM to ACM.The documentation explains ACM mode. We have no access to...
View ArticleRe: Intel Capability Licensing Service Client is obsolete
Hi D.Mihai,You need to get the latest Management Engine Driver from the ASRock web site. That should help.Please visit this site, http://www.asrock.com/mb/Intel/B150M-HDS/?cat=Download click the link...
View ArticleClik here to view.
Re: Intel Capability Licensing Service Client is obsolete
Still the same, that is the last version available from ASRock on the motherboard webpage, it's from 12/6/2017.
View ArticleRe: Intel Capability Licensing Service Client is obsolete
Hi D.Mihai,The iCLS is distributed by Intel directly to the system manufacturers. We rely on them to test it with their systems and distribute it to customers.Please contact ASRock and ask them how to...
View ArticleRe: NTEL-SA-00075 Detection does not detect status in registry
Hi NickPifer86,Looking further into this, we'd like to have the following information:1. What system make/model are you running this on or is it occurring on multiple systems? If multiple systems,...
View ArticleRe: Missing Boot Options on AMT WebUI
Hi Musketier,I'm going to assume you are using SCS as a deployment method for provisioning your headless systems. When you provision remotely, this will put AMT on the system you are running ACUConfig...
View ArticleClik here to view.
Re: Missing Boot Options on AMT WebUI
Hello Michael, I'm afraid. I can not use SCS. We have remote access over VPN/RDP to the single systems. I do not have direct access to the customer corporate network.This means I do not have access to...
View ArticleClik here to view.
Re: NTEL-SA-00075 Detection does not detect status in registry
Hello Michael, Thank you for the support session.Based on your clarifications on the logic rules I was able to determine the vulnerability status. I copy them here so others may benefit too.SA-00075...
View ArticleRe: Missing Boot Options on AMT WebUI
Hi Musketier,I'm copying your post here so I can respond inline: I'm afraid. I can not use SCS. We have remote access over VPN/RDP to the single systems. I do not have direct access to the customer...
View ArticleClik here to view.
Re: NTEL-SA-00075 Detection does not detect status in registry
Hi Tomasz,This looks really good and hopefully others can use this also. Thank you for your contributions here and it was a pleasure meeting with you.Regards,Michael
View ArticleTrouble using Agent Presence
system HP ProDesk 600 G3 SFF ram: 4gb OS: Windows 10 Pro ver. 1709 build 16299.125 AMT release 11.6.12.1201 Two issues1) unable to use manual or usb key configuration to set admin mode2) unable to...
View ArticleClik here to view.
Re: NTEL-SA-00075 Detection does not detect status in registry
Hi Michael. Of course, here you go: 1-Dell Optiplex 3050's, once the firmware update has already been run. We're using BIOS version 1.7.4 to patch the optiplex's. 2-Windows 10, version 1607 (The...
View ArticleClik here to view.
Re: Missing Boot Options on AMT WebUI
Hello Michael, I understand that AMT and its funcionality is a security sensitive technology. On the other hand we need a may to enable AMT if we need it. If we enable AMT than it should be enabled...
View ArticleClik here to view.
Researchers Found Another Major Security Flaw in Intel CPUs
Subject article posted January 12 2018 see Researchers Found Another Major Security Flaw in Intel CPUs - ExtremeTech From what I can tell the VPRO and AMI interfaces are accessible from the internet....
View Article